ENTER TO WIN NOW!!
THIS RAFFLE PAGE IS DEDICATED BY XTREME ZONE R/C TO HELPING RC RACERS STAY AT THE TOP OF THEIR GAME SO ENTER NOW AND OFTEN TO WIN THE PRODUCT OF YOUR CHOICE. WHEN THE THERMOMETER TURNS RED AT THE TOP WE WILL DRAW A WINNER FROM THE ENTRIES. GOODLUCK TO ALL!
THE RAFFLES MAY BE ENTERED ONLINE OR AT THE STORE
ENTER WITH PAYPAL
EACH ONLINE RAFFLE ENTRY IS FOR THE PRODUCT LISTED IN EACH CATAGORY. EACH ENTRY IS A MINIMUM OF 2.00 AND WILL HAVE YOUR NAME ATTACHED TO IT. IF YOU DO YOUR RAFFLE ONLINE THEN YOU WILL RECEIVE AND ELECTRONIC RECEIPT INSTANTLY. EACH PRODUCT RAFFLED OFF WILL BE GIVEN AWAY ONCE THE GOAL IS MET BY THE INDICATED SIDEBAR FOR THAT PRODUCT. EACH RAFFLE IS 100% GARANTEED BY XTREME ZONE R/C AND THE PICTURES OF EACH WINNER WILL BE POSTED ONLINE ON THIS SITE. ALL ADDITIONAL FUNDS WILL BE DONATED 100% TO THE TRACK UPGRADES.
THANKS FOR YOUR PERTISIPATION!
This is the Team Associated TC6.2 Factory Team 1/10 Electric Touring
Car Kit. The successful R.O.A.R. and B.R.C.A. national
championship-winning TC6 has been refined with a variety of
performance-enhancing upgrades that take the TC6 platform to the next
level. The RC10TC6.2 Factory Team kit features an updated bulkhead, top
plate, and chassis configuration that will allow the user to optimize
the amount of flex in the chassis by disconnecting the drivetrain
bulkheads and suspension mounting systems. This arrangement allows the
user to tune the flex through the entire length of chassis, giving
maximum, yet predictable grip on any track surface. At only 88mm wide
and 2.25mm thick, the TC6.2 carbon fiber chassis remains very narrow,
resulting in reduced drag during the hardest cornering.
The TC6.2 retains the H.D.R.C. (High Definition Roll Control) system that allows the user to adjust and control roll stiffness using the two wires that mount into the sides of an aluminum center member and link to the suspension arms. The aluminum center member rolls on a bearing surface to reduce friction and provides ultra-precise movement. The independent arm mount system features interchangeable toe inserts and pivot ball joints, allowing the racer to dial-in the suspension on an even more granular level. Optimized ballstud positions are connected with eyelet ball cups and blue titanium turnbuckles, adding up to an easier-to-tune platform with even more precise suspension adjustments than before.
The included Factory Team VCS3 shocks feature hard-anodized threaded bodies with bottom-loaded seals for super smooth operation. TiN-coated shock shafts and an increased stroke, help to deliver improved traction. The TC6.2 incorporates a floating servo mount that not only improves steering control but also offers an increased area for mounting the ESC and receiver. The floating servo ties directly into a dual bellcrank steering system with optimized Ackermann and steering speed. The rear differential is a lightweight gear type configuration for maximum performance, adjustability, and low maintenance, while the front spool features replaceable composite outdrives with the performance of low-friction CVA blades to allow for free axle movement. The TC6.2 is rounded out with 22 precision ball bearings, Team Associated's TC6.2 has what it takes to keep you out in front and ahead of the pack in today's highly competitive touring car races.
This is the Viper R/C VTX10R Combo Package, with an included 10.5
Turn "VST" Brushless Motor and EZ Link programming card. Viper’s VTX10R
electronic speed controller for 1/10 and 1/12-scale RC cars and trucks
gives you more features and innovations to make your on-road and
off-road RC cars not only ready to run, but ready to compete! The
revolutionary V-PORT interface allows you to easily manipulate your ESC
settings via the included VIPER EZ Link without unplugging the receiver
connector. The small footprint allows for a variety of mounting options,
while the waterproof aluminum case provides maximum durability.
Viper R/C VST series sensored brushless motors offer smooth and efficient performance, durability, versatility and quality. The VST series motors feature a re-buildable design and high precision ball bearings for superior performance, and long life. Plus, five optional tuning rotors offer a wide range of tuning options, allowing you to get the most out of your motor. A precision machined 6061 T6 billet aluminum ribbed can is designed to provide the best protection and cooling, while the ultra low resistance, high current soldering tab system provides trouble free connections and easy wiring.
The EZ Link is the same size as a credit card, and is used for tuning the speed control while at the track without the need for a computer. The innovative V-Port on the VTX speed control allows for programmability without removing the speed control wire from the receiver. This means less wear over time and you never have to dig into your receiver to make an adjustment. All these features are complimented by Viper's 365 day limited manufacturers warranty on all electronics for peace of mind.
Engineered, built and tested to meet the needs of even the most demanding RC car applications, Viper R/C products have been proven to provide smooth and reliable performance for your RC car.
This is the Mugen MBX7E ECO M-Spec 1/8 Electric Off-Road Competition
Race Roller Buggy. The Mugen design team started with the World Champion
MBX7 Nitro buggy platform and created what could become the industry
standard for 1/8 Electric Buggy racing. The M-Spec version is unique in
that it is a pre-built 1/8 Electric Buggy with all the tricks and tweaks
used by the Mugen Factory race team. The shocks, differentials, camber,
caster and toe in settings are straight from Mugens stable of factory
drivers and have been incorporated into a chassis that needs nothing
more than your ESC/Motor, Radio, Battery and tires to be race ready!
The ECO is equipped with a battery tray that will allow you to use either two 2 cell LiPo batteries in a staggered mounting position for optimum weight distribution or a single 4 cell battery; the choice is yours! A re-designed motor mount has been beefed up, so you can run bigger, faster electric motors without losing gear mesh or without the flex that can cause motor and mount failures. The heavy duty sliding motor mount is anchored down with 4mm screws for extra strength. A re-designed ackerman plate has been used to provide adjustable steering response from smooth to aggressive, while a stylish cab forward body with raised sides on the rear portion delivers additional rear traction.
All the World Championship winning features from the MBX7 Nitro buggy are standard issue, from the rear suspension with adjustable anti-squat and toe in, to the shorter shocks on the front end; this is all part of the ECO platform.
This is JQ Products 'THE Engine' .21 Competition Turbo Plug Buggy Engine.